American-time Wi-Fi Analog Clock Manual de usuario descargar pdf (Pagina 2)

If clock was not precongured at American Time as recommended, please reference the

Installation & Operation Manual.

Set up the Wi-Fi clock

1. Apply power to the clock by inserting the barrel plug (B) of the battery pack into the left

side of the Wi-Fi module where the power connection is located.

• Verify the LED (C):

–Flashes red when power is applied to the clock

–Flashes green within 60 seconds

–Green ashing stops within 120 seconds

• Verify the clock hands begin to spin rapidly within six minutes after applying power.

• Verify the correct time on the clock within 20 minutes of applying power.

If any of these steps do not occur, reference the Wi-Fi Clock Installation & Operation Manual.

Verify clock hand placement

1. Verify the clock hands are set at 12:00 by the factory (if not, stop and call 800-328-8996)

Note: It is normal for the minute hand to shift ±

⁄2 minute.

2. Remove the green gear locking pin (A) from the movement.

Hang your clocks

1. Place the clock on the wall using the keyhole hanger on the back of the clock or the

optional security bracket (sold separately)..

B Battery

pack power

input

C LED

A Green gear

locking pin

Security

Bracket

Keyhole

Hanger

INST-WIFI-ANA Rev 2

1 2

Sin comentarios

American-time Wi-Fi Analog Clock Manual de usuario Pagina 2